DCC-EX CSB1 Case – 4 output

Description

The DCC-EX CSB1 case is designed specifically to fit the 4 output DCC-EX CSB1 Command Station, supplied by us or Millennium Engineering directly, which features the separate 128×64 pixel Piico Dev screen. After first reading the instructions attached below, simply unscrew your CSB1 from the existing resin ‘sled’ and clip it into the bottom half of the case. Provisions have been made in the top half of the case to allow the separate screen to clip into place, also made easier by the inclusion of a shorter I2C cable.

*Please use the supplied instructions below to help you install your CSB1 and screen into the case, particularly to avoid breaking the screen!*

Note: This case is designed exclusively to fit the DCC-EX CSB1 with 1x additional motor shield stacked on top, it is also not designed to fit any other kinds of Arduino/ESP32 boards that can be used to produce a DIY DCC-EX command station.

Includes:

• Case top (to fit screen)
• Case bottom (to fit CSB1 PCB)
• Qwiic 50mm I2C cable (to fit to your existing 128×64 pixel screen, shorter than already supplied 100mm cable)

Specifications:

• Size:
• Material: Liquid photopolymer plastic (SLA resin 3D printed)
• Industrially 3D printed in China

Instructions:

EX-CSB1 Case Installation Guide